EEMUA 146 PIPE FITTINGS

The EEMUA 146 grade fittings are copper-nickel alloy specifications. EEMUA 146 fittings are designed to route, change, and branch connections. These fittings play a critical role in influencing the characteristics of the flow in the system. The EEMUA 146 Pipe Fittings have enhanced corrosion and oxidation resistance properties. These fittings have good anti-fouling properties and showcase enhanced mechanical properties. The EEMUA 146 Copper Nickel Tee is designed with a three-sided opening allowing for media to move across two channels. The versatile EEMUA 146 Tee is produced with two outlets and one inlet that is attached at 90 degrees to the main pipeline. These tees are utilized in equal and reducing sizes. In an EEMUA 146 Reducing Tee one of the channels is made of unequal size, allowing for reduced flow in one of the openings. These tees are available in eccentric and concentric reducers. The EEMUA 146 UNS 7060x Concentric Reducer is a cone-shaped grade that reduces the pipe size from the center. These reducers have a matched center line. EEMUA 146 Eccentric Reducers reduce the pipe from the sides. These reducers possess a mismatched centreline and require to be aligned properly for an even flow of media.

The EEMUA 146 UNS 7060x Elbow is a common type of fitting that is used to change the direction of the flow in the system. These elbows are designed in short or long based on their radius of curvature. An EEMUA 146 Copper Nickel Long Radius Elbow has 1.5 times the radius of curvature than the outer diameter of the pipe. These elbows allow for a swift flow of media in different conditions. The EEMUA 146 Butt Weld End Caps are primarily used to close the ends of the hydraulic system to terminate the flow of fluids and gases. They also cut off contaminants from entering the grade. EEMUA 146 Stub End is a short piece of pipe having a flared end and can be used as an alternative to a standard flange.